Pit Survey Form

If you have any questions on the measurements required please contact our

Sales or technical departments on

01454 299299 or view our video here

Pit Survey Form

Your pit jack will fit into your pit and be operational within minutes of being delivered. It will not foul on lights, air pipes or electricity supply. With your help we will get it right first time.

@
Your email (we'll use this to send over your estimate)
Diagram Reference Information Required Information Supplied
1
Minimum axle to ground clearance*
2
Have you angle or channel sections?
- Angle
- Channel
Is the surface where the wheels will run flat or tapered?
- Flat
- Tapered
3
Measurement of the depth of angle or channel section from the workshop floor*
4
Width inside vertical flanges of the pit rails, at 1 metre intervals as indicated on diagram.*
Minimum*
5
Width of pit, check this along the length of your pit at this point between pit rails, at 1 metre intervals as indicated on diagram.*
Minimum*
6
Width inside vertical flanges of the pit rails, at 1 metre intervals as indicated on diagram.*
Left*
7
Distance to the top of any Lights, Air or Electricity Supply that intrude into the pit. (Left is facing the operating controls of a Pit Jack)*
Left*
8
Depth of pit.*
9
Please advise any other information on the pit construction not mentioned above which you think is relevant,*

Sales:

24hr Service Hotline:

Pit Survey Form

@

1

2

3

4

5

6

7

8

9